Products > Bearing units > Ball bearing units
            Ball bearing units
Pillow block units
Four bolts flange units
Two bolts flange units
Three bolts flange units
Take-up units
Four bolts flange cartridge units
Cartridge units
Other type units
Pressed housing units
Rubber housing units

The ball bearing unit consists of a housing and the bearing insert which commonly known as a sealed wide inner ring ball bearing with spherical outside diameter. The fitness between the bearing insert and housing can help the unit to achieve self-aligning to compensates the initial misalignment that may occur by mounting ,shaft deflection, and mounting base deformation. The bearing can be fixed by setscrews at the expected position on main machine, therefore, sparing a lot of trouble to design a new mating bearing box. These units offer simple and economic bearing arrangements and facilitate their applications widely among agriculture, construction, textile, conveyor, foods, printing industries.


The bearing insert is the variant design based on deep groove ball bearings of 6000,6200,6300 series. The locking instruments on the wide inner ring incorporate with lock accessories such as setscrews, eccentric collar, adapt sleeve and locking sleeve make installation, maintenance and repair to be a simple job. All the bearing inserts have re-lubricated nipples on the outer ring for supplying and replacing the lubricant. The unique sealing design can accommodate various kinds of applications, effectively shield off the contaminant as well as avoid the leakage of grease and resist the pressure from outside.


TCB is able to offer various shapes and wide range of housings made from cast iron, ductile cast, steel, pressed steel, rubber and plastic. The bearing insert can match any type of housing of same size, correspondingly, is suitable for applications where the users’ own housings are preferred

     Characteristics of TCB bearings
     Rolling bearings
           Deep groove ball bearings
           Angular contact ball bearings
           Angular contact thrust ball bearings
           Cylindrical roller bearings
           Spherical roller bearings
           Track rollers
           Mast guide bearings
     Bearing units (Mounted bearings)
           Ball bearing inserts
           Ball bearing units
           Spherical roller bearing inserts
           Spherical roller bearing units
     Plain bearings
           Spherical plain bearings
           Dry sliding bearings
     Other products
           Special ball bearings
           Stud type track rollers
           Roller chain idler sprocket units
           Other Special bearings

Tel +86-760-88297638

Fax +86-760-88297639

E-mailtech @

AddNo.7.Yixian RD,Torch Zone, Zhong shan,Guangdong,China

Copyright (C) TCB Ltd. All Rights ReservedYUE ICP beian 05028273